Supply and Hardware Store MA Blog

RSS Grab Monnick Supply RSS Feed!

Prepare Your Snowblower for This Coming Winter

- Monday, September 16, 2019
Monnick Supply, Snowblowers - Marlborough, Framingham, MA

When the leaves start to fall and snow is on the way, it’s a great time to get prep the snowblower for the winter. You don’t want that first snowfall to hit and find out your machine is not in working condition.

If you are not comfortable or unsure of something, its recommended to have a professional look at it. Monnick Supply offers pre-season specials for annual tune-ups.

Check for Damage

Take a minute to look over your machine. Make sure your auger, skids, and scraper are in good enough shape. Check that cables, handles, shear pins, and fasteners are securely in place. If you find excessive wear or damaged parts, order replacements and install them before the first snow hits.

Tighten Loose Bolts and Levers

A Well Maintained SnowblowerIt’s a good idea to check bolts and screws for proper tightness. The vibration of the machine over time may have caused them to come loose. It is recommended to remove the spark plug to prevent any unintentional starting during this process.

Check Tire Pressure

Months of storage can do a number on your tires and its important that they are inflated properly before use. This ensures you don’t damage other parts and get the best possible traction in icy conditions. Most tires can be inflated using a standard bicycle pump. Your user manual should provide the recommended tire pressure. If you hate dealing with pneumatic tires, maybe it’s time to replace them with some airless tires.

Flip the Skid Shoes

If your snow blower has skid shoes (most two-stage snow blowers do), it’s a good time to flip them if there is wear. Most skid shoes are reversible. And if you’ve already done this, it might be time to purchase some replacement ones before the season starts. They are relatively easy to install.

Inspect the Belts

Check for excessive wear or cracks on the belts. If you find some, it is time to replace them. Sears recommends snapping a picture of the belts before replacing them so you’ll know exactly where they go.

Fill the Gas Tank

You should have drained the gas tank before storing your snow blower away in the Spring. Or at least put in a fuel stabilizer.

Check Oil

Take out the dipstick and look to see how clear the oil is. If it’s dirty, it’s time for an oil change.

Install a New Spark Plug

Checking your spark plug at the start of the season is always a good idea. If there are signs of rust and corrosion, it’s time for a replacement. If it’s just dirty, maybe it just needs a cleaning. Spark plugs are cheap so don’t mess around too much trying to save an old one.

Spray the Discharge Chute

To prevent clogging, you’ll want to spray down the discharge chute with something. Many people have success with WD-40, cooking spray (my choice), or silicone. Some companies sell specially made snow repellent sprays too. Those tend to be too expensive in my opinion.

Start Your Snow Blower

With everything in place, it’s time to test your machine out. Let it run for a few minutes and check for any odd burning smells or unsettling noises. If all goes well, you’re ready to tackle the Winter.

For more information or to schedule snowblower service, contact Monnick Supply.

snowblowers.net


OUR STORE LOCATIONS

Marlborough Store

135 Maple Street,
Marlborough, MA
Call (508) 318-4788


Mon-Fri 7:00am to 6:00pm
Sat 7:00am to 5:30pm
Sun 12:00pm to 4:00pm

Framingham Store

759 Waverly Street,
Framingham, MA
Call (508) 386-9876


Mon-Fri 7:00am to 6:00pm
Sat 8:00am to 5:30pm
Sun 10:00am to 4:00pm

Monnick Supply $$
135 Maple St.
Marlborough MA 01752
United States
(508) 318-4788
Mon-Fri 7am - 6pm
Sat 7am - 5:30pm
Sun 12pm - 4pm
Monnick Supply $$
759 Waverly St.
Framingham MA 01702
United States
(508) 386-9876
Mon-Fri 7am - 6pm
Sat 8am - 5:30pm
Sun 10am - 4pm