Drain Snake Closet Auger 3'
Flexicore® Closet Augers Flexicore® Closet Augers are the ideal tool for breaking up stoppages or retrieving lost objects in clogged toilet bowls. Works where plungers fail. The patented Flexicore cable is made from two layers of tempered spring wire wrapped tightly around a 49-stand wire rope center. It resists kinking and breaking yet has the right flexibility to get through low flow toilets. It’s so tough, it’s guaranteed for a full year.Rental Prices
Day- $12.00 / Week- / 4 Hours-
Drain Snake Drill Style
Drain Snake Used to clean clogged sinks, tubs, toilets and more.
Drill Style Drain Snake, for pipes up to 2" in diameter and up to 25'
Click Here For Operating & Safety Instructions
Trouble-free operation and easy handling make the Super-Vee an excellent tool for opening clogged sinks, bathroom drains, and even roof drains. The variable speed double insulated motor provides complete control for any small line job.
Rental Prices
Day- $36.50 / Week- / 4 Hours- $30.00
Drain Snake Easy Rooter 5/8" x 100'
The Easy Rooter Drain Snake For Cleaning 4" To 6" Lines The Easy Rooter is a tough, easy-to-use machine. It has a rugged powder coated steel frame with roll bars to protect the motor and heavy-duty roller bearings in the cage for longer life and greater motor efficiency on long runs. The large cage holds 100 feet of 5/8" Flexicore® cable to clear tree roots and other difficult obstructions in 4” to 6” drain lines. Click Here For Operating & Safety InstructionsRental Prices
Day- $70.00 / Week- / 4 Hours- $50.00
Drain Snake: Mini Rooter
The Mini-Rooter clears lines from roof top to basement, including kitchen, bath and laundry, with 50 ft. 1/2" cable it weighs just 60 lbs. Click Here For Operating & Safety Instructions This inexpensive, easy-to-use machine has lots of time saving features. For instance, you can remove the cage in seconds for more portability or to switch to a different cable diameter – with no mess or lost time. Safety features include an air foot switch, ground fault circuit interrupter, and a safety slip clutch. An integral inner drum and distributor tube help prevent cable tangling under load.Rental Prices
Day- $55.00 / Week- / 4 Hours- $40.00
Pipe Thawing Heater Unit
Pipe Thawing Tool Ridgid Pipe Thawing Unit KT-200 Model KT-200 Pipe Thawing unit provide continuous heating for fast thawing of frozen metal pipes from 1/2" through 1 1/2" (12-36mm). With these lightweight and versatile units, there is no need to dig or tear apart walls. Simply attach the clamps to the metal pipe on each side of the frozen section and the pipe is thawed within minutes. Primarily recommended for all indoor copper or steel pipes from 1/2″ to 11/2″. Thawing units will not work with plastic pipe or lines containing plastic or rubber couplings. KT-200 Thawing Unit: Input 115 Volts, 15 Amps Output.... 4.5 - 7.6 Volts Minimum Reach 15′ 4′ Maximum Reach 50′ Output..300 Amps Weight ... 29 lbs Most frozen pipes can be thawed in less than an hour, depending on location and number of pipes to be thawed. Please, Click Here For Operating & Safety Instructions.Rental Prices
Day- $100.00 / Week- / 4 Hours- $50.00
Pump Submersible 2"
Submersible Pump, Electric 2" Discharge| Model Number: | LB480 |
| Manufacturer: | Tsurumi Pump |
| Motor | |
| Continuous Operation: | Yes |
| Oil-Cooled: | Yes |
| Shaft Seal: | Silicon Carbide |
| Running Amps: | 6.1-Amps |
| Voltage: | 120-Volt |
| HP/CC: | .66 HP |
| Pump | |
| Gallons Per Minute: | 62.4 GPM |
| Outlet Diameter: | 2" |
| Mechanical Seal Material: | Silicon Carbide |
| Housing Material: | Cast Iron |
| Impeller Material: | Plastic |
| Solids Handling: | .25 Inch |
| Total Head Lift: | 39.5 Feet |
| Overview | |
| Weight: | 28 Lbs. (12.70 kilograms) |
| Dimensions: | L x 7.375"W x 11.25H (0.00 x 18.73 x 28.58 cm) |
Rental Prices
Day- $45.00 / Week- / 4 Hours- $35.00
Pump Submersible 3/4"
3/4" Submersible Pump 1/2 HP, Submersible, Non-Clogging, Votex Design Utility Pump, Pumps Up To 2500 GPH @ 0', Corrosion Resistant Reinforced Thermoplastic Housing, Volute & Impeller, Bottom Suction Design Filters Debris & Removes Water Down To 1/4" Of Surface, Passes Up To 1/2" Solids, 1 1/4" NPS High Volume Discharge With 3/4" Garden Hose Adapter, Easy Access Handle For Portability.1/2 HP, Submersible, Non-Clogging, Votex Design Utility Pump, Pumps Up To 2500 GPH @ 0', Corrosion Resistant Reinforced Thermoplastic Housing, Volute & Impeller, Bottom Suction Design Filters Debris & Removes Water Down To 1/4" Of Surface, Passes Up To 1/2" Solids, 1 1/4" NPS High Volume Discharge With 3/4" Garden Hose Adapter, Easy Access Handle For Portability.Rental Prices
Day- $22.00 / Week- / 4 Hours- $18.00
Trash Pump
2" Trash Pump This is a 2" trash pump. Used for dewatering, pools, wet basements, Excavation sites. 1-2"X 20' Suction Hose 2.50 1-2" X 50' Discharge Hose $12.50 Each ESI Trash Pump Operation & Safety, Please Click HereRental Prices
Day- $55.00 / Week- / 4 Hours- $45.50